The Prism SIP Gateway Rackmount Model:

  • Available with 2, 4, 6 or 8 T1/E1/PRI Spans.
  • Up to 120 VoIP channels per unit.
  • Available in MultiPath or Gateway Configurations.
  • Auto-Provisioning tools for remote installations.
  • Survivable with failover to backup circuit.
  • Unified Communications Proxy (UCP).
  • Supported with Remote Management Tools.
  • Direct links between medical facilities and Prism's paging service providers.
  • Virtual VoIP applications plus secure VPN links.

Enterprises can benefit from a variety of valuable applications such as PBX extension, remote office connectivity, long distance consolidation and call centers. Service providers can deploy numerous VoIP applications such as SIP Trunking, Wholesale VoIP Termination, Calling Cards, Tandem Switching and Least Cost Routing. Product scales from a fractional T1/E1, with 8 simultaneous VoIP channels up to a full 8 span MultiPath Switch supporting 120 simultaneous VoIP calls.

  • MultiPath architecture for easy integration with existing voice and data infrastructure, meaning little or no re-programming of the PBX, or upgrades are required and no need for special dialing plans.
  • Transparent MultiPath Call Routing to intelligently route calls between the PBX, the PSTN, and the IP network to achieve the best combination of cost and quality. The Prism SIP Gateway can also route calls over IP to reduce costs, and then transparently "hop off" to the PSTN, to reach off-net locations.
  • PacketSaver? Technology multiplexing to reduce bandwidth consumption by up to 57% by combining voice packets from multiple calls into a single packet.
  • Universal Dial Plan that provides a programmable dial plan so Prism SIP Gateway to be integrated into any network environment.
  • Auto Provisioning interface allows the Prism SIP Gateway solution to be deployed worldwide, and configured automatically by acquiring the configuration information from a central server, upon installation. The same auto-provisioning capability allows the Prism SIP Gateway to be configured from a VoIP application, thus supporting a single user interface between the VoIP application and the Prism SIP Gateway configuration.
  • Unified Communications Proxy (UCP) provides 'Any to Any' connectivity: SIP-SIP, TDM-TDM and SIP-TDM, for easy integration with any network.
  • NATAccess™ to allow Prism SIP Gateway to operate behind NAT firewalls to translate internal IP addresses into public addresses when a VoIP call is established with an outside party.
  • Remote Management for anywhere, anytime remote management even behind NAT firewalls with Quintum's Remote Management Session Server.

Prism SIP Gateway assures that VoIP can be deployed easily in existing voice and data networks, offering unmatched voice quality and survivability, network-wide scalability, and easy, secure remote management for installation, configuration, upgrades, troubleshooting and repair. All this adds up to lower TCO than any other VoIP solution on the market!